TH90-60L Hollow Blow Molding Machine
Hollow blow moulding machine PLC plus human-machine interface, touch operation. Fault alarm self-diagnosis, clear at a glance.
Central feeding die, completely eliminate product convergence line, and fast color change.
Mould shifting adopts double linear guide rail and center clamping. The force is uniform to ensure the smooth cut of the product.
Hydraulic system adopts proportional hydraulic control, equipped with imported hydraulic components, accurate, stable, energy-saving.
Blow moulding machine uses high speed, high efficiency and low energy consumption plasticizing system, mixing uniformly and excellently t
| TH90-60Ltechnical parameter | UNIT | THA90-60L |
| Maximum product volume | L | 60 |
| Empty cycle | PCS/H | 500 |
| Screw diameter | MM | 90 |
| Screw length to diameter ratio | L/D | 25 |
| Screw motor power | KW | 37 |
| Blowing machine screw heating power | KW | 21 |
| Number of screw heating sections | ZONE | 4 |
| HDPE material extrusion | KG/H | 140 |
| Oil pump motor power | KW | 18.5 |
| KN | 350 | |
| Opening and closing stroke | MM | 500-1200 |
| Blow molding machine template size | W x H(MM) | 700x 1200 |
| Maximum die diameter | MM | 350 |
| Storage amount | L | 6.6 |
| Die heating power | KW | 17 |
| Number of heating sections | ZONE | 4 |
| MPA | 0.8 | |
| Gas usage | M3/MIN | 0.8 |
| Cooling water pressure | MPA | 0.3 |
| Water consumption of hollow blow molding machine | L/MIN | 85 |
| Machine dimensions | L x W x H(M) | 5.3 x 2.4x 3.8 |
| TON | 13.2 |
